01 Cabrinha Contra 1S Kiteboarding Kite

:01 Cabrinha Contra 1S Kiteboarding Kite

Performance Lightwind / Freeride

Sizes: 3m / 4m / 5m / 7m / 9m / 11m

What Cabrinha has to say about the Contra 1S

The popularity of the Contra can not be overstated. It’s ability to extend any kite quiver well into the light wind arena is unmatched. This season we’ve expanded the Contra’s range to bring its legendary efficiency deep into the foil boarding realm.

The single strut version of the Contra is built on its platform of efficiency and range, while adding featherweight control. With its single strut, the Contra 1S is lighter and more nimble, allowing the use of much smaller kite sizes to maximize foilboarding’s true potential.

The Contra 1-strut’s superior drift characteristics allow for low angles of attack while on foil, and the rear line tension increases steering impulse even when depowered.

This dynamic kite design shift will put an optimized Contra light wind kite in your hands whether you ride a twin tip, surfboard, or a foil board.

Design Profile

• 1-Strut
• Hybrid design
• Low drag wing tips
• Draft forward profiles

Rider Profile

Perfect for any rider that wants an ultra efficient, responsive 1-strut kite.

Features

• Lightweight 1-strut design
• Heavy duty closing seam construction
• Nano Ripstop Canopy, the benchmark in durability, stability and responsiveness High Tenacity Dacron for enhanced arc stability and improved handling characteristics
• Strategic canopy reinforcements in the high stress areas
• Pure profile panels for efficient aerodynamics
• Agile and nimble steering for increased power delivery
• Superior drift characteristics and underpowered steering response
• Effortless relaunch in the lightest of wind conditions

Technology

NANO RIPSTOP CANOPY

A higher level of performance can only be achieved when the kite’s design properties are supported by a stable and reactive kite material. Nano Ripstop does just that.

HIGH TENACITY DACRON

Our Dacron is specifically designed for inflated kite structures. The construction of this material is very warp oriented using ultra high tenacity yarns with an increased thread count to combat elongation in the warp direction under high inflation pressures. Lower elongation makes for a more accurate kite with less deformation while in flight.

PURE PROFILE PANELS

The strategically placed panels provide ultimate control over the aero-dynamic profiles in the kite. Smooth and stable profile entry. Improved overall kite efficiency, performance, and range. Faster flying through the sky giving you a broader range of performance.

SKELETAL FRAME

Provides the structure that keeps the kite design true to its intended shape while in-flight. The stable frame drives the kite through turbulence with a minimal amount of deformation and has excellent overall de-power. The inflated leading edge introduces the laminar flow of air across the kite’s Pure Profile panels, for a quick recovery if stalled and prevents the kite folding on itself.  The inflatable structure reduces the amount of bridling required for stability. It also provides safety by providing some flotation in the water, and enables easy re-launch.

1X SECURITY

Upon activation of 1X’s single line flagging system the power of a kite is immediately killed and it will rest motionless on the water or land.

SPRINT SYSTEM W/ AIRLOCK

The Sprint inflation systems is the most efficient and easy way to get your kite inflated and deflated quickly. The enlarged Airlock valve quickly feeds air into all of the struts from a single location. The Airlock connection to the Sprint pump requires no special adapters.  Once inflated, you can lock off each strut independently to keep your kite’s rigid frame, and isolate any accidental strut deflation from the rest of the kite. When the session is over, the entire kite will deflate in seconds thanks to the Airlock valve’s large dump feature.

DYNAMIC ARC

Dynamic arc allows the kite to have two distinct arc shapes. The arc of the kite  takes on one shape while flying, and another shape while in resting mode on the water. While resting on the water the arc opens up slightly to facilitate an easier relaunch.

POWER CONTROL

Every Cabrinha kite comes with a simple, user adjustable way to choose the power level of the kite. Each rear line “pig tail” connector has three power positions you can connect to. The middle position is the factory recommended position. However, the user can choose to create more power by connecting the knot closest to the kite, or less power by connecting to the knot closest to the rider.